NPX136D Series Panel Mount P25 VHF Transceiver
SM68 Installation and Operation Manual
Section 3 Rev: 1.00 Issue
4
Page 3-7
ENG-FORM: 806-0114.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
3.4.1.5
Scan Flags
Scan flags denote the channels that will be checked during scanning.
SC
indicates the current channel is
checked when list scanning.
P1
indicates the current channel is checked during priority scan. If a channel
is set as a priority scan channel and a list scan channel just the priority scan flag is shown.
3.4.1.6 Display
Type
The display type is selected with the Display switch. The display types are
R
:
for receive display,
T
:
for
transmit display.
S
:
for simplex display,
Z
:
for zone display,
Rx TGID
:
for receive talk group,
Tx TGID
:
for transmit talk group and
Splx TGID
:
for simplex talk group. The display types shown are
dependent on the current radio configuration.
3.4.1.6.1
Receive Display (Duplex Mode)
R:173.9975 ---
Shows the receive frequency in MHz to four decimal places and the receive squelch mode. For analog
channels the receive squelch mode is the analog tone frequency or code, or dashed lines if no tone is
selected. For digital channels the receive squelch mode is the receive network access code or
MON
if the
digital squelch mode is set to monitor. Also, for digital channels, the talk group flag
TG
is shown if the
channel's digital squelch mode is set to select. See section
3.6.
3.
3.4.1.6.2 Transmit Display (Duplex Mode)
T:173.9975 --- LO
Shows the transmit frequency in MHz to four decimal places and the transmit squelch mode. For analog
channels the transmit squelch mode is the analog tone frequency or code, or dashed lines if no tone is
selected. For digital channels this is the transmit network access code. Also shown is the transmit power
flag
LO
or
HI
for the NPX136D's transmit power setting. See section
3.6.
3.
3.4.1.6.3 Simplex Display (Simplex Mode)
S:173.9975 --- LO
If the Transmit mode is set to Simplex, the simplex display shows the receive and transmit frequency in
MHz to four decimal places, and the receive and transmit squelch mode. The transmit power flag
LO
or
HI
is
also shown. See section
3.6.
3.
3.4.1.6.4
Zone display
Z:All ALL CHANS
Shows the zone number and zone name for the current zone. The zone display is shown when zones are
turned on from the edit zone menu.
3.4.1.6.5
Receive Talk Group ID (Duplex Mode)
Rx TGID: 12345
Shows the receive talk group ID for the channel. Shown for digital channels with the digital squelch set to
select when turned on from the display settings talk group field.
