About the Simulator
2
Thank you for purchasing a Pediatric Water Rescue Manikin. The product comes with two tools; a faucet
connection hose and an air inflation bulb.
To simulate realistic weight and to use in water rescue and safety training, fill manikin with water using
the following instructions.
FILL MANIKIN
Steps:
1.
Hold manikin upside down or lay in sink.
2.
Open both valves on bottom of manikin’s feet. Rescue Timmy has one metal valve on the left foot
and one aqua drain valve with an internal flap on the right foot.
3.
Attach hose from faucet to left metal valve on baby’s
foot or insert through internal flap of aqua drain valve
on Timmy’s foot.
(See Figure 1.)
4.
Fill manikin with warm water until water begins to flow
from the open metal valve on right foot.
5.
Shut off flow of water.
6.
Close valve on right foot.
7.
Remove hose from valve on left foot.
8.
Gently squeeze air from manikin until water flows from
left valve. Close valve tightly.
9.
Let manikin lay 1 or 2 minutes with head down.
10.
Repeat steps 2 through 8 making sure all air is out of
the manikin.
NOTE:
Do not store manikins filled with water. Microbiological growth could occur and extreme
temperature will effect the manikin.
Rescue Cathy & Billy
Rescue
Timmy
Figure 1
Thank you for purchasing a Pediatric Water Rescue Manikin. The prod-
uct comes with two tools; a faucet connection hose and an air inflation
bulb. To simulate realistic weight and to use in water rescue and safety
training, fill manikin with water using the following instructions.
FILL MANIKIN
Steps:
1. Hold manikin upside down or lay in sink.
2. Open both valves on bottom of manikin’s feet. Rescue Timmy has
one metal valve on the left foot and one aqua drain valve with an
internal flap on the right foot.
3. Attach hose from faucet to left metal valve on
baby’s foot or insert through internal flap of
aqua drain valve on Timmy’s foot.
(See Figure 1.)
4. Fill manikin with warm water until water
begins to flow from the open metal valve on
right foot.
5. Shut off flow of water.
6. Close valve on right foot.
7. Remove hose from valve on left foot.
8. Gently squeeze air from manikin until
water flows from left valve. Close valve tightly.
9.Let manikin lay 1 or 2 minutes with head down.
10. Repeat steps 2 through 8 making sure all air is out of the manikin.
NOTE: Do not store manikins filled with water as microbiological
growth could occur. Exposure to extreme temperatures can also dam-
age the manikin.
Thank you for purchasing a Pediatric Water Rescue Manikin. The product comes with two tools; a faucet
connection hose and an air inflation bulb.
To simulate realistic weight and to use in water rescue and safety training, fill manikin with water using
the following instructions.
FILL MANIKIN
Steps:
1.
Hold manikin upside down or lay in sink.
2.
Open both valves on bottom of manikin’s feet. Rescue Timmy has one metal valve on the left foot
and one aqua drain valve with an internal flap on the right foot.
3.
Attach hose from faucet to left metal valve on baby’s
foot or insert through internal flap of aqua drain valve
on Timmy’s foot.
(See Figure 1.)
4.
Fill manikin with warm water until water begins to flow
from the open metal valve on right foot.
5.
Shut off flow of water.
6.
Close valve on right foot.
7.
Remove hose from valve on left foot.
8.
Gently squeeze air from manikin until water flows from
left valve. Close valve tightly.
9.
Let manikin lay 1 or 2 minutes with head down.
10.
Repeat steps 2 through 8 making sure all air is out of
the manikin.
NOTE:
Do not store manikins filled with water. Microbiological growth could occur and extreme
temperature will effect the manikin.
Rescue Cathy & Billy
Rescue
Timmy
Figure 1
Thank you for purchasing a Pediatric Water Rescue Manikin. The product comes with two tools; a faucet
connection hose and an air inflation bulb.
To simulate realistic weight and to use in water rescue and safety training, fill manikin with water using
the following instructions.
FILL MANIKIN
Steps:
1.
Hold manikin upside down or lay in sink.
2.
Open both valves on bottom of manikin’s feet. Rescue Timmy has one metal valve on the left foot
and one aqua drain valve with an internal flap on the right foot.
3.
Attach hose from faucet to left metal valve on baby’s
foot or insert through internal flap of aqua drain valve
on Timmy’s foot.
(See Figure 1.)
4.
Fill manikin with warm water until water begins to flow
from the open metal valve on right foot.
5.
Shut off flow of water.
6.
Close valve on right foot.
7.
Remove hose from valve on left foot.
8.
Gently squeeze air from manikin until water flows from
left valve. Close valve tightly.
9.
Let manikin lay 1 or 2 minutes with head down.
10.
Repeat steps 2 through 8 making sure all air is out of
the manikin.
NOTE:
Do not store manikins filled with water. Microbiological growth could occur and extreme
temperature will effect the manikin.
Rescue Cathy & Billy
Rescue
Timmy
Figure 1
