Page 3 of 23
1.1
Receipt Of Machine
Upon receipt of machine carefully remove all protective packaging and establish machine on a
flat and level floor. Take care to protect the machine from sudden shocks etc. when lifting or
manhandling.
The machine should only be situated indoors, and should not be subjected to any other
environments. Ensure all ventilation grills have at least 4" (100mm) clearance from other
surfaces to permit adequate cooling.
1.2
Electrical Connection
The Nascar machine should be connected to the mains supply via a suitable plug to suit your
installation requirements (Ref: Section 2.1). A competent trained person should always carry
this out. If in any doubt, consult a qualified electrician.
Mains wiring:
Live
Black
Neutral
White
Earth
Green or Green/Yellow
THIS MACHINE MUST BE EARTHED/GROUNDED
1.3
Electrical Supply Entry
This machine electrical supply connects at the rear.
The On/Off switch for the machine is located in the right hand lower compartment.
1.4
Physical Dimension
See following page….
Summary of Contents for Pusher 2pl
Page 4: ...1224 1913 1500 ...
