Insert bare wire part of speaker cables of
to corresponding Left and Right Channel
Output of the Wireless Amplifier.
IV. Powering the Wireless Amplifier
i. Turn the volume by rotating the volume
control at the back of the unit to middle.
ii. Insert the small, round plug from Wireless
Amplifier AC power adaptor into the power
input jack
iii. Plug the other end of the AC power adaptor
into any standard 120V AC wall outlet.
Note: Be sure to use the AC power adaptors
rated 15V DC 1600mA or listed in page 6, 7
and 8.
1. After powering up the Wireless Amplifier,
the power/RSSI indicator will start blinking
in green and orange color and searching for
transmitter.
Page 11 Of 15
Rev
00
