NASA electric NS-940, Manual

Page: 18 / 23

18
5.Snap the two lid locking clip onto the lid to lock it into place
(‘click’) (1). Align the groove in the pusher with the small protru-
sion on the inside of the feeding tube and slide the pusher into
the feeding tube (2).
Make sure the lid locking clip are locked into position on either
side of the lid.
6.Place the juice jug under the spout.
Place the lid on the juice jug to avoid splattering or if you want to
store the juice in the refrigerator.
Using the appliance
The appliance will only function if all parts have been properly
assembled and the lid has been properly locked in place with the
lid locking clip.
1. Wash the fruit and/or vegetables and cut them into pieces that
fit into the feeding tube.
2.Make sure the juice jug has been placed under the spout.
3.Turn the control knob to setting 1 (low speed ) or 2 (normal
speed) to switch on the appliance.
Speed 1 is especially suitable for soft fruits and vegetables such
as watermelons, grapes, tomatoes, cucumbers and raspberries.
Speed 2 is suitable for all kinds of fruits and vegetables.
Put the pre-cut pieces in the feeding tube and gently press them
down towards the rotating filter with the pusher.
Do not exert too much pressure on the pusher, as this could
affect the quality of the end result and it could even cause the
filter to come to a halt.