NASA electric NS-60, Manual

Page: 17 / 23

17
4.After the indicator goes out, turn the steam control to the suit-
able position (fig10), steam will be sprayed, ironing can start.
Bursting steam:
Set the temperature control at the “
…
” or MAX position, then
press down the bursting steam button (fig11), the base plate will
spray out bursting steam.
Dry ironing:
Turn the steam control to minimum position (fig6), set the tem -
perature control to the suitable position, you can dry ironing.
Self cleaning:
1.Set the 3-position switch to position (for corded iron)
2.Take the iron from the stand.
3.Ensure that there is enough water in the water tank.
4.Set the temperature konb to MAX
5.Insert the mains plug into the wall socket
6.When the pilot light first goes out and then comes on again,
remove the mains plug from the wall socket
7.Press the “self clean” button for about 1 minute,
8.Strong steam and hot water will be sprayed to clean the steam
chamber.
9. Let the iron heat up again, the remainder of the water in-
side the steam chamber will now vaporized and leave the iron
through the soleplate.