NS-1965
Blender
4
How to assemble & opening container blender
Device parts & accessories
A
Small lid
H
Smoothie button
B
Blender container lid
I
Speed volume
C
Blender jar
J
On\Off button
D
Pusher
K
LED light
E
Anti-shake base
L
Body of device
F
Sauce maker button
M
Pulse button
G
Ice crusher button
N
-
Instructions for use
•
When the device is on, the LED lights on and
off and then goes into Standby mode.
• If the speed volume is in the "0" position,
the device will go into Standby mode. Volume
status in "MIN" mode means minimum speed
and in "MAX" mode means maximum speed.
After turning on, set the speed volume to the
"MIN" position, the device will start at the low-
est speed. You can adjust the speed by turning
the volume.
• When you turn on the device, the device will
not work if the volume control volume is not
in the "0" mode. You must set the speed vol-
ume to "0" to restart. This mode is built-in to
prevent the device from starting accidentally.
• The standard time to use the mixer is 2 min
-
utes.
• Hold the pulse button to operate the device
at maximum speed.
• The panel of the device includes three
functions of sauce maker, ice crushing and
smoothie. To use any of these functions, you
can press the corresponding button. In this
case, according to the desired function, the
device starts working. You can also press
the same key to stop the device. The volume
control and pulse button do not work when the
device is working with these three functions.
Notes
• Mixer container is made of unbreakable
plastic with a capacity of 2 liters and has a
stainless steel blade.
Warning:
Use only the pusher to push food
through the small lid of the Blender container.
Before using it, make sure that the mixer con-
tainer lid is in place.
• Safety switch:
If the container is not in place
or removed while working, the device will stop.
You need to put the container in place, set the
shift volume to "0", and then turn on the ap-
pliance.
• Overheating protection:
If the device is
overworked and loaded, the temperature lim-
iter stops the device to prevent it from over-
heating. Please wait for the device to cool
A
B
L
M
K
J
I
H
G
C
D
E
F
