NASA electric NS-1964, Quick Start Manual

Page: 9 / 13

NS-1964
Blender
4
How to assemble & opening device container
Notes
• Do not spill food or liquids over the MAX
level into the mixer container.
• Do not turn on the device continuously
for more than 3 minutes.
• Capacity the mixer glass: 1.5 liters
• The device is equipped with a pulse button.
• Safety switch: If the container is not in
place or removed while working, the de-
vice will stop. You have to put the con-
tainer in place, put the turntable in the "0"
position and then turn on the appliance.
• Overheating protection: If the device
is overworked and loaded, the temper-
ature limiter stops the device to prevent
it from overheating. Please wait for the
appliance to cool down if the tempera-
ture limiter is activated, then you can turn
on the appliance again.
How to clean and maintenance
1. Before cleaning the device, make sure
that the device is off and the speed con-
troller is in the "0" position. You must also
unplug the plug.
2. You can wash the blender container
with water and dishwashing liquid.
3. Clean the body of the appliance only
23. Unplug the appliance If you do not
use the appliance and before installing
and removing parts, cleaning or handling
running parts of the appliance.
24. In the event of an abnormal noise or
severe vibration during operation, please
stop the device and take it to a NASA
Electric after-sales service department
for inspection. Never repair the device
yourself.
25. Do not place the appliance near or
on hot surfaces such as stoves, electric
heaters or hot ovens.
26. To reduce burns, it is best to allow the
device to cool after mixing hot liquids and
before removing and cleaning the parts.
Device parts & accessories
A Small lid E The body of device
B
Blender container
lid
F Pulse button
C Blender jar G Timing volume
D
Blender blade &
base
H Anti-shake base
A
B
C
D
F
E
G
H