2
LoRaWAN™ MULTICAL READER CM3060
1. Register the unit to the LoRa network
• Details needed for registering the device with your LoRa service
provider are
included in a separate sticker.
2. Open Multical meter housing
3. Install Multical Reader into the expansion module slot.
• Terminal block side first
• Lock it in place
4. Connect external antenna
5. Close Multical meter housing
• Use dedicated wire outlets
6. Apply DC voltage (optional)
INSTALLATION GUIDE
Prerequisites
Installation procedure
• Free expansion module slot
2.
3.
4.
5.
Connect external DC power supply (optional)
• +3,7V - positve
• GND - negative
• Do not remove battery if present
• Set switch to EXT position
