Narwal T10 User Manual Download Page 5

7. 

This product is not intended for use by persons(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience and knowledge, unless they have been given supervisor 
instruction concerning use of the product by a person responsible for their safety. 

8. 

Children should be supervised to ensure that they do not play with the product. Please keep children 
and pets away from the product when it is working.

9. 

Please keep accessories such as sweeping module and mopping module out of children's reach. 

10.  Do not use the robot to clean any burning objects (such as burning cigarettes)
11.  Do not place any objects (including humans and pets) on stationary or moving robots.
12.  Please clean or maintain the robot and base station during shutdown or power off.
13.  Do not use the robot to clean long wool carpets.
14.  Do not wipe any part of the robot body with a damp cloth or any liquid.
15.  Do not use any third-party batteries, chargers or charging docks.
16.  Do not disassemble, repair or modify robots, base stations and batteries without authorization.
17.  Do not discard or place the discarded battery at will, and it should be disposed of by a professional 

recycling agency.

18.  If the power cord is broken, please stop using it immediately and contact customer service.
19.  If you need to transport the product, please make sure that the robot is turned off. It is recommended 

to use the original packaging when shipping.

20.  When the product is discarded, the battery must be taken out of the product. When removing the 

battery, make sure that the robot is turned off.

21.  Please stop current task and ensure that the robot is in the base station before updating.
22.  Keep product packages (package bags, foams and etc.) out of the reach of children.
23.  If the robot is in the base station, please do not lift the base station to prevent the robot from slipping.
24.  It is forbidden to run the robot with the top cover open.

Warning

Summary of Contents for T10





























Reviews: