NARVON
5
CLEANING
EMPTY THE BOWL
(Skip this step if this is the initial cleaning)
DISASSEMBLY
Dispensing Tap
(Fig. 6)
Lid
(Fig. 7)
Bowl
(Fig. 8-12)
Drip Tray
(Fig. 13)
1 .
Use the tap lever to empty any remaining liquid into a container.
2 . DO NOT proceed without emptying the bowl .
1 . Place hand beneath the dispensing outlet
to catch pieces as they are released .
2 .
Pull the Lever Pin (A) to disconnect the
Tap Valve (C) and Spring (D).
3 .
If the Tap Lever (E) is to be washed,
remove Lever Pin (B).
1 . Rotate the lid towards the front .
2 .
Lift the lid upwards
1 .
Remove the (2) Front Fixing Knobs by unscrewing them
counter-clockwise. (Fig. 8)
2 . Remove the bowl from its seat .
(Fig. 9)
3 . Gently pull on the spiral blades to remove from the cylindrical
evaporators. (Fig. 10)
4 . Gently
pull on the Spiral Blade Gasket to remove. (Fig. 11)
5 . Gently pull on the Bowl Gasket to remove .
(Fig. 12)
1 .
Lift upward and then away from the machine to unseat the hooks.
2 . Wash with warm water and dry .
3 . Re-insert the hooks into their holes and push down .
The machine must be turned OFF and unplugged
from the power source before cleaning .
CAUTION
CAUTION
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
When cleaning
or lifting,
DO NOT GRAB
THE MACHINE
BY THE
CYLINDRICAL
EVAPORATORS .
Fig. 6
A
B
C
1
2
D
E
Summary of Contents for 378SMM1B
Page 2: ...NARVON...
