![background image](http://html1.mh-extra.com/html/narvi/narvi-ultra/narvi-ultra_installation-and-instruction-manual_3323609013.webp)
4. LOADING OF STONES:
- When loading the stones, make sure they do not bend the resistors or obstruct
sufficient circulation of air.
- Do not load the stones too tightly. Over-filling of the stone compartment will cause
overheating of the resistors (= shorter service life) and slower heating up of
the sauna.
- Suitable stones for the stove are 4-7 cm in diameter.
- The stones shall cover the heating resistors completely.
AN UNDER-FILLED STONE COMPARTMENT WILL CAUSE A FIRE HAZARD!
ALWAYS CHECK THE SAUNA BEFORE SWITCHING ON THE STOVE.
5. VENTILATION IN THE SAUNA:
- The ventilation in the sauna should be as efficient as possible in order to ensure
a sufficient oxygen level and freshness of air. We recommend that the fresh air
intake is located near the stove (but not closer than 50 cm).
- The fresh air intake shall be equipped with an adjustable valve.
- The exhaust valve shall be at least twice the size of the fresh air intake. The
exhaust valve can be installed on the opposite wall, at least 20 cm higher than
the fresh air intake.
6. CONSTRUCTION OF SAUNA:
- The sauna shall be well heat insulated, particularly the ceiling, where most of the
steam rises. Due to the high level of humidity, the heat insulation should be
covered with moisture-proof material, such as aluminium paper.
Wood should always be used for cladding.
7. SPARE PARTS: