[Mount a spring balance]
Narika's spring balance SO series (Catalog number: A05-4053-W1, W2, W3, A05-4054-W1) can be
mounted on
the ’s top of the cart to measure the force strengths in experiments. A bracket (part No. 9)
holding a spring balance on the top is beneath the body. Remove the bracket from beneath the body
and set it on the top with a knurled screw. Then place and fit the spring balance
into the bracket on the top.
[Use of an anti-moving stopper]
The dynamic cart is equipped with an anti-moving stopper (part No. 4) to keep it from rolling down on
an inclined plane or on a table during experiments. Rotating clockwise the knob on the top of the cart
until the stopper touching to the surface can stop the cart on the inclined plane or the table during the
preparation of experiments. If turning the knob anticlockwise, it will return to its original position and the
cart will freely move.
[Attaching a Camera]
If you screw the force sensor anchoring rod (part No. 7) to the screw hole (part no. 3) the other
way, then when you were using it with force sensor then you can attach a camera to the body.
Size of the screw is 1/4-20 UNC.
