2
This product is used for “experiments for checking the movement of a weight rolling on a slope”
.
We can call it Weight Collision Test Apparatus or I-Gauge. It can easily change the height of point
to release the rolling weight (i.e., inclination of a slope) or the mass of the weight. It enables
collision experiments under stable conditions, since the rail on which the weight rolls down
smoothly changes a slope angle or even get into a almost horizontal position.
The advanced model OS-KB allows enhanced collision experiments while measuring the collision
speed using the BeeSpi v (speed measurement device) supplied with the product.
・
Do not store the product in a dusty, humid, or hot place.
・
Do not use or leave the product in a place exposed to strong direct sunlight, a car under the burning sun, or a hot
place. Otherwise, it may deform or become defective.
・
Do not make an experiment on an unstable table or on an inclined surface.
・
Do not expose the product to a strong impact or throw it.
[SPECIFICATIONS]
CAUTION
If the product is used improperly, injury or physical damages may result.
Angle adjusting plate
BeeSpi V fixing adapter
Sliding body for collision experiment
Gate
Size : 1,050 x 100 x 185 mm
Angle adjustment: 0° to 45°
Material: Body (wood), Rail (plastic)
Rail length: 1,000 mm (scale length: 500 mm)
Accessories: ø 25 mm steel ball (70g), ø 25 mm porcelain ball (19g), two weight-stopping gates,
One sliding body for collision experiments (acrylic plate, 40 x 80 x 13.6 mm),
Three fixing screws, BeeSpi V (OS-KB only).
Slope base
Fixing screws
