NARGESA PP200, Instruction Book, Page: 14 / 48

INSTRUCTIONS BOOK HORIZONTAL PRESS BRAKE PP200 13
5.5. Manual mode
The manual mode is the mode of work of the machine which is used to adjust and centre the different
accessories and shapes as it allows us total control over the movements of the machine.
The manual mode functions by pressing or releasing the pedals to move forwards or backwards. If the
pedal is releasesd the machine will stop in that position, the machine will also stop at the end of its
displacement.
5.6. Automatic mode
The automatic mode is the usual production mode.
In order to select the automatic performance mode, we press the “Automatic” key and the machine will ask
if we want to go into the “Automatic Mode”. We press the automatic key again in order to confirm.
The automatic mode functions by maintaining the pedal pressed until the machine reaches the point
indicated by the forward stop point knob, when the pedal is released the machine will reverse the
maneuvre until it reaches the standby position. If the pedal is released before end of trajectory the
machine will also reverse the maneuvre returning it to the standby position.
NOTE: The machine in use can be seen on our website: www.nargesa.com
or on our Youtube channel, link:
https://www.youtube.com/watch?v=TEPEwYjt08s