NARGESA MC400, Instruction Book, Page: 4 / 18

MC400 BENDING MACHINE INSTRUCTION BOOK 2
1. MACHINE INFORMATION
1.1. Identification of the machine.
Trademark : NARGESA
Type: Curvadora
Model: MC 400-9
1.2. Normal use of the machine.
The profile former has been designed for bending profiles, pipes, angles, etc... At different dimensions and
different kinds of materials.
A set of standard tooling is provided with the machine, with which you will be able to bend the different pofi-
les. Anyhow the manufacturer can provide you with any kind of roller so you can make other kinds of ben-
dings as well as Delring rollers to avoid damaging the works in inox or aluminium.
If an accident occurs due to a negligent use on the operative’s side, for not following the safety ru-
les exposed on this book, PRADA NARGESA S.L will not accept any resposibility.
1.3. Contraindications of use
Every use different from the one for bending of materials.
1.4. Noise caused by the machine.
In this particular case the noise is almost nn existent under normalworking conditions.
1.5. Vibrations
Like noise, vibrations could be considered non existent since this is a fixed machine and besides it has a
low rotary speed on the rollers.
1.6. Operative natural working place.
The machine can be used just by only one worker at the time, who will be located in front of the machine so
it can regulate the movement of the threes moveable axes.
1.7. Description of the machine.
The machine is equipped with a 1,1 Kw power and the reducer that transmits rotation to the
three axe through cogged crowns. These are steel treated and rectified axes 40mm diemeter