NARGESA CC90, Instruction Book

Page: 20 / 36

- 20 -
4.5. Adjusting the Limit
The bender switch CC90 is adjusted by our technicians before the machine is sent to the customer. How-
ever, you need to check and re
- adjust the limit before working with it.
1. Insert a pipe measuring 1200 mm minimum in the limit as indicated in section 5.2. Securing the Pipe to
the Limit . Use a marker to make a mark at 1000 mm on the other end of the pipe and place it in the main
roller.
2. Place one of the adjustable stoppers at 100 mm and secure it.