NARGESA 2020-240, Instruction Book, Page: 21 / 54

- 20 -
SECTION BENDING MACHINE MC650
5.4. Working position
MC650 can work with the machine bed horizontal or vertical as needed, according to the work to be done.
To place the bending machine in horizontal position:
1. Secure the machine at the anchor point indicated in the illustration with a forklift.
2. Lift the machine carefully until it is not in contact with the ground
3. Lower it so that the part behind the machine bed is resting on the ground.
4. Using the forklift, carefully move the machine backwards until the machine bed is totally resting on the
ground.