English
18
Cordless Circular Saw CPK 65
Original operating manual (EN)
Machine Description
1 �������Switch
2 �������Safety against accidental start
3a �����Movable blade guard
3b �����Blade guard arresting lever
4 �������Spindle
5 �������Clamping flange
6 �������Clamping screw
7 �������Saw blade*
8 �������Hex key
9 �������Spindle arresting button
10 �����Secondary handle
11 �����Guide plate
11a ���Guiding groove for cuts without angling
11b ��Guiding groove for cuts at 45° angle
12a ���Blade angle scale
12b ��Angle indicator
12c ���Angle arresting screw
13 �����Parallel stop (Guide)
13a ���Guide slot
13b ��Guide fastening screw
14a ���Depth of cut guide slot
14b ��Depth of cut arresting lever
15 �����LED lighting of the workspace
16 �����Hole for chip extraction
17 �����Vents
B1 �����Battery*
B2 �����Accumulator clamp
B3 �����Accumulator status control panel
B4 �����LED indicator of accumulator status
B5 �����Control button
N1 ����Charger*
N2 ����LED charging indicators
*) The accessories displayed or described here may not be in-
cluded in the delivery.
Table of contents
Machine Description .........................................................................18
General Power Tool Safety Warnings .............................................19
Safety instructions for all saws .......................................................20
Further safety instructions for all saws ..........................................20
Safety instructions for saws with lower quard .............................20
Charger safety warnings ..................................................................20
Information about noise level and vibrations ..............................20
Use .......................................................................................................21
Accumulator Charging Instructions ...............................................21
Mounting a Saw Blade .....................................................................22
Setting Depth of Cut .........................................................................22
Setting Cutting Angle .......................................................................22
Parallel Stop (Guide) ........................................................................22
Starting the Machine ........................................................................22
Work Instructions ..............................................................................22
Checking Accumulator Status .........................................................22
Electronic Safeguards .......................................................................22
Maintenance and service .................................................................22
Accessories..........................................................................................23
Storage ................................................................................................23
Environmental protection ................................................................23
Warranty .............................................................................................23
Certificate of Conformity ..................................................................23
Technical Information
Type
CPK 65
Voltage (V)
20�0
No-load speed (min
-1
):
5 000
Depth of cut (mm):
90°
0–65
45°
0–43
Cutting angle
90°–45°
Saw blade (mm):
Diameter
185
Clamping hole
20
Max� tooth width
2�0
Max� blade thickness
1�4
Weight without batteries (kg)
3�44
Recommended charger
CN 20
Recommended batteries
CB 4
Summary of Contents for CPK 65
