English
18
CBU 125 Cordless Angle Grinder
Original operating manual (EN)
Machine Description
1 ........Switch
2 ........Gearbox
2a ......Spindle locking pin
3 ........Guard fastening neck
4a ......Guiding groove for the guard
4b .....Guiding protrusions of the guard
5 ........Guard
5a ......Guard arresting lever
6a ......Guard for grinding
6b .....Guard for cutting*
7 ........Grinding spindle
8 ........Bottom flange
9 ........Fastening nut
10a ...Grinding discs*
10b ...Cutting discs*
11 ......Detachable handle
12 ......Wrench for fastening nut
13 ......Air holes
B1 .....Battery*
B2 .....Accumulator clamp
B3 .....Accumulator status control panel
B4 .....LED indicator of accumulator status
B5 .....Control button
N1 .....Charger*
N2 .....LED charging indicators
*) The accessories displayed or described here may not be included
in the delivery.
Table of contents
Machine Description .................................................................................18
Technical information ...............................................................................18
General Power Tool Safety Warnings ......................................................19
Special Safety Instructions .......................................................................19
Charger safety warnings ...........................................................................21
Information about noise level and vibrations .......................................21
Use ................................................................................................................21
Accumulator Charging Instructions ........................................................21
Safety Elements and Their Mounting .....................................................22
Mounting a Grinding or Cutting Disc ......................................................22
Starting the Machine.................................................................................22
Electronic Safeguards ................................................................................22
Grinding and Cutting Discs ......................................................................22
Checking Accumulator Status ..................................................................23
Maintenance and Service .........................................................................23
Accessories ..................................................................................................23
Storage ........................................................................................................23
Environmental protection ........................................................................23
Warranty .....................................................................................................23
Certificate of Conformity ..........................................................................23
Technical information
Type
CBU 125
Supply voltage (V)
20.0
No-load speed (rpm)
8 000
Disc braking time (s)
(Grinding disc)
1.6
Max. diameter of grinding / cutting disc (mm)
125
Max. peripheral speed (m/s)
80
Mounting spindle thread
M 14
Weight without batteries (kg)
1.6
Recommended charger
CN 20
Recommended batteries
CB 4
Charger
Type
CN 20
Input voltage (V)
100–240
Frequency (Hz)
50–60
Power input (W)
95
Output voltage (V)
20.0 ± 0.15
Electric charge current (A)
4.0
Charge time (min):
CB 4
about 60
Weight (kg)
0.46
Protection rating
II /
Summary of Contents for CBU 125
