DRYER 400
5 |
P a g i n a
DENTAL
Nardi Compressori – www.nardicompressori.com
2.02
SAFETY ESSENTIALS:
Before using the DRYER 400 please read carefully the following information
:
-
Intake air should not be stale or contaminated, the compressor should not be placed in areas where
there is dust, danger of explosion, corrosion or fire.
-
Make sure that at the time of service or when you want to replace spare parts on the compressor it is
not pressurized and the power plug is disconnected from the power line..
-
Replace filter air cleaning parts only with original products from Nardi Compressori.
-
When the compressor/dryer is not in use, turn off the power. Never tug on the cable but rather pull the
plug to disconnect it from the outlet. Make sure that the cable does not pass over sharp edges or bend
at a sharp angle (in this case use an extension).
-
Periodically check the general conditions, especially near the joints, and if small defects are present
proceed to the replacement of defective parts.
-
Periodically check connections for leaks.
-
Repair and replace any damaged part only with original spare parts Nardi Compressori.
-
Do not modify the machine except with express written authorization from Nardi Compressori.
-
When starting the machine, make sure people are not in contact with it.
-
The operator’s and maintenance manual must be available at all times. Put it in an easily accessible
place near the machine and protect it from damage.
-
All maintenance and repair tasks on the machine, must be performed by qualified personnel.
-
Never exceed the maximum working pressure of 10 bar.
3
WARRANTY AND SERVICE
3.01 WARRANTY OF DRYER 400 :
NARDI COMPRESSORI
warrants the
DRYER 400
for a period of twenty four months from the date indicated on the label
on the DRYER..
During the time of production and testing a label is put on the machine showing that it is in conformity with the standards
of the European Union showing the CE marking. The warranty is voided if this label is by any reason removed or altered
in any way.
For the warranty to be valid, it is necessary that the has complied with the provisions of the contract and that the DRYER
400 has been used as specified and has not been altered or modified without the agreement and confirmation of NARDI
COMPRESSORI.
The warranty is not applicable when:
•
The machine has not been used properly (as indicated in this manual)
•
Non-guaranteed consumable materials and materials of periodic maintenance are used, particularly if used improperly.
•
Non original NARDI COMPRESSORI spare parts and replacements are used.
•
Gases other than air are used.
3.02 SERVICE OF DRYER 400:
To order spare parts please contact or visit our dealers. In case of difficulty in finding a spare part, contact directly NARDI
COMPRESSORI. We are available for any queries or further information and we will put you in contact with skillful
technical staff to help you. If you need service or assistance, please contact out dealers in your area.
