NARDA nbm-520, Operating Manual

Page: 37 / 64

4.11 Remote control
Narda NBM-520
31
To set the alarm limit
For normal (flat) probes:
⇒
Select the desired limit value for
LIMIT FLAT
using the
PC software.
ª
The symbol is shown in the display when the
alarm function is activated (see
Overview of the dis-
play
on page 26).
Table 3 Setting ranges of the limit values (in 1 dB steps)
For shaped probes:
⇒
Select the desired limit value (percentage of the stan-
dard value) for
LIMIT SHAP
using the PC software.
Setting range: 0.1% to 10,000% (in 1 dB steps)
ª
The symbol is shown in the display when the
alarm function is activated (see
Overview of the dis-
play
on page 26).
To deactivate the alarm function
⇒
Set the parameter
ALARM
to
OFF
using the PC soft-
ware.
4.11 Remote control
The NBM-520 can be remote controlled using the NBM-TS
software or from an NBM-550 measuring set. This allows
you to use the NBM-520 in places that are difficult to reach
and read the results without needing to see the actual dis-
play on the NBM-520. While the NBM-520 is remote con-
trolled,
REMOTE
appears in the display instead of field type
(E-Field or H-Field).
Measuring range Minimum Maximum
V/m 100 mV/m 100 kV/m
A/m 250
μ
A/m 250 A/m
W/m
2
25
μ
W/m
2
25 MW//m
2
mW/cm
2
2.5 nW/cm
2
2.5 kW/cm
2