NARDA IDA, Operating Manual, Page: 91 / 292

5.3 Displaying and editing configuration data
Narda IDA - 3106
83
Creating a new transmitter table
Main Menu • Settings • Transmitter Table
You must first create an empty table and then fill it up in order to create a
new transmitter table. Each transmitter in a transmitter table must be
defined separately by its center frequency and channel bandwidth, in
contrast with multi-channel tables. However, the separate frequency bands
in a Transmitter Table can also overlap.
Tip:
The transmitter frequencies can be entered much more easily using the
marker in
Spectrum
mode. You can find information about this under
Adding individual frequencies to a Transmitter Table
on page 84.
To create a new transmitter table:
1.
Press the
Create Transmitter Table
softkey.
2.
Enter a name and press
OK
to save it.
3.
Select the new table using the rotary control knob and press the
Edit Transmitter Table
softkey.
4.
Press the
Add Transmitter
softkey to add a new transmitter, and make
the necessary settings using the available softkeys:
–
Transmitter Name:
Edit the transmitter name
–
Fcent:
Enter the
center frequency
–
CBW:
Enter the
channel bandwidth
–
Antenna Polarization:
Select the polarization (optional information)
–
Directional Antenna:
Select the antenna (optional information)
–
Add Transmitter:
Add a further transmitter
–
Delete Transmitter:
Delete the selected transmitter
–
Sort:
Sort the transmitters according to their names or center
frequencies
5.
Press the
ESC
key to exit from the table.
Displaying and editing items in a transmitter table
Main Menu • Settings • Transmitter Table
1.
Select a table using the rotary control knob and press the
Edit Transmitter Table
softkey.

The existing transmitters are shown as a list.
2.
Press the
ESC
key to exit the menu without making any changes.
3.
To edit the transmitters: Use the softkeys as described under Creating a
new transmitter table
on page 83.
4.
Press the
ESC
key to exit from the table.