NARDA FieldMan, Quick Start Manual, Page: 30 / 112

2 Connection and commissioning
30
FieldMan Narda
E
N
2.5.4 Select the country of use
(for WiFi/Bluetooth option)
If the WiFi/Bluetooth option is available, a selection list of countries for which a radio
license exists appears during initial commissioning and after a factory reset. Then select
the country in which the device will be operated. The country selection configures the
radio module for this region and selects the corresponding radio standard.
Select the country of use:
✓
The device is being operated for the first time or a factory reset has been performed.
⇒
On the start screen, select the country of use from the drop-down menu and confirm
with
OK
.
Changing the country setting at a later date:
A factory reset must be performed for this purpose.
1.
Press
SK4
to open the device settings.
2.
Perform the reset under
GENERAL SETTINGS
>
DEVICE
>
Factory Reset
.
3.
On the start screen, select the country of use from the drop-down menu and confirm
with
OK
.
The device may only be operated with the correct country setting! Operating the radio
module in non-listed countries is not allowed.
FieldMan_KBA.book Seite 30