17
14.5.1 Continued
2.
Assign a NAV or COM frequency (See Section 14.4).
3.
Press the "M-SET" switch to the ON position to enable the "#" Key.
4.
Depress the "#" Key. Confirm that the letters "MW" appear in the
display.
5.
Depress that location key (M0 to M9) at which the frequency is to
be stored. When the key is depressed, the frequency is stored.
Confirm that when the location key is depressed that the letters
"MW" change to "M" (memory mode), and that a numeral corresponding
to the location number appears in the smaller display.
6.
Depress "D" Key ("M" disappears from the LCD) to take the radio
out of the memory mode and put it in the frequency mode. Remember
you can only assign a frequency if the "M" legend is out.
7.
Assign a frequency for the next memory location.
8.
Keep repeating steps 4, 5, 6, and 7 until all the desired
locations are programmed.
9.
Press "M-SET" switch to disable the "#" Key.
EXAMPLE: Store 135.525 MHz in memory location M1.
