09
30
Disc Function Operation
1. Play/eject disc
Play disc
Insert the disc into the disc slot with the printing surface up, system will detect the disc and automatically take it in to read and play.
Eject disc
(1) Click
button on the panel to eject the disc.
(2) If a disc has not been took away 15 seconds after it is ejected, system will automatically take in the disc but not play.
Do not insert two discs or more.
Play/pause
Touch the button to pause, retouch it to continue to play.
Stop
Touch the button to enter into pre stop status.
The previous/next song
Touch the button to select the previous/next song.
Fast
forward
/
backward
Consecutively touch this button to select the speed of fast-forward/fast-backward.
Volume adjustment button
Touch this button and volume adjustment modulation shall pop up, touch
button to adjust the volume.
PIC 1
2. DVD/VCD disc playback
During playback of disc, touch the middle lower area of the screen to pop up the touch menu, operate the touch menu to perform
various playback controls. (
PIC 1
)
3.
After a CD is inserted, system shall access disk reading state immediately.
When there is a disk in the device, click [Disk] at the main interface so as to access disk reading state.
After the disk being read out, system shall automatically play in sequence.
4. MP3/JPEG/MPEG4 disk playing
When the disk contains readable files, such as MP3/JPEG/MPEG4 files, it shall be automatically read out and played after slipping into
DVD player.
During playing, touch the screen area and the touch menu shall pop up. Operate the touch menu for various playing.
CD Disc Playback
5. Touch Menu Function Description
x
20
TT 1/1 CH 1/48
00
:
09
:
43
00
:
01
:
44
x
20
TT 1/1 CH 1/48
00
:
09
:
43
00
:
01
:
44
Configuração do volante
2.O veículo original tem controle de linha positiva, negativa com a linha de
controle da máquina na conexão positiva e negativa.
3.Clicando nos botões de volante, aparecerá dicas de operação correspondentes,
e operações fundamentais poderão ajustar as características do volante.
4.Ajusta função para salvar as configurações e clique no ícone “confirm”
para confirmar.
Pra confirmar as configurações de função, repita os procedimentos 3-4.
Para reiniciar, clique no ícone [reset], todas as configurações ajustadas anteriormente serão resetadas, repita o procedimentos 3-4.
1.Clique no ícone [steering wheel] na interface principal dentro da interface de configuração do volante.
