EN
W415-2355 / 11.13.19
39
9.1 front face kit installation
A.
Remove the safety barrier and glass door (see "safety barrier & glass door" section).
B.
Install the side brackets, ensure the front face is on a soft surface to avoid any damages during bracket
installation
(Fig. 1)
.
C.
Install the safety barrier, spline up
(Fig. 2 & 3)
.
D.
Install the decorative facing trim
(Fig. 4)
.
E.
Install the 4 screws with spacers into the sides of the firebox
(Fig. 5).
F.
Place the front facing onto the appliance by hooking the its brackets over the screws and spacers
(Fig. 6)
.
G.
Install the rest of the top trim and control panel
(Fig. 7)
.
Fig. 1
BA
RR
IER
SA
FE
TY
Fig. 2
W565-0094
W565-0094
W715-0744
W715-0745
W565-0094
W565-0094
W715-0744
W715-0745
Fig. 3
!
WARNING
• The components in this kit are heavy. Use care when lifting and ensure they are firmly secured once installed.
• This front facing does not replace the main glass door. Do not operate without the main glass door installed.
• The front facing can be installed flush with a counter, floor, or hearth.
SA
FE
TY
SC
RE
EN
PR
OT
EC
TIO
N
L’É
CR
AN
DE
Fig. 4
