18
www.napoleongrills.com
Propane Only
4 x N570-0080 (#14 x 1/2”)
3/8”(10mm)
3. Propane Tank Ring Installation
Insert propane tank ring into slots in bottom of shelf as shown. Fold tabs over to secure in place.
4. Left and Right Cart Panel Installation
Install end cart panels ensuring slots in panel are to the top, rest panel on bottom shelf and line up holes. Fasten using
(4) #14 x 1/2” screws.
5. Transformer/Rear Cart Panel Installation
Install the transformer and the power bar onto the rear panel as illustrated using (6) M4 x 8mm screws and (6) M4 lock nuts.
Route the power cord through the rubber grommet in the rear panel.
Fit the rear cart panel between the two end panels; ensure the large holes in the rear panel are to the bottom of cart as
illustrated. Fasten using (6) #14 x 1/2” screws, three on each side.
L485RSIB MODEL