2
-
Frequently examine the installation, in particular check cables, springs and
mountings for signs of wear, damage or imbalance. Do not use if repair or
adjustment is needed since a fault in the installation or an incorrectly balanced door
may cause injury.
-
Each month check that the drive reverses when the door contacts a 50 mm high
object placed on the floor. Adjust if necessary and recheck since an incorrect
adjustment may present a hazard, for drives incorporating an entrapment
protection system depending on contact with the bottom edge of the door.
-
Details on how to use the manual release.
-
Information concerning the adjustment of the door and drive.
-
Disconnect the supply when cleaning or carrying out other maintenance.
-
The installation instructions shall include details for the installation of the drive and
its associated components.
Basic function introduction
1. Soft start, soft stop
Minimize start-up load on garage door opener and garage door
2
．
Opening & closing force self-learning
3
．
Overloading force detecting, the door will reverse more than 15 cm automatically when it is
overloaded when closing.
4. Security resistance adjustable, with a wide range, sensitive and reliable.
5
．
Wall switch
6
．
Infra-red security protection, the door will change to open when obstruction is detected
while closing.
7
．
Low-voltage protection, the process will not perform any action of opening and closing when
voltage is too low, door panel and controll
er won‟t be damaged.
8
．
We adopt rolling code transmitter, with billions of codes, won‟t be coincident code or pirated
code.
9
．
Optional battery back up, in case of power failure.
10
．
Key lock feature.
11
．
With self-closing feature.
Special function introduction
The following functions are made to order in accordance with the special needs of
customers:
1. Caution light feature
2. O/S/C button function (
“K” – Button)
3. Pass door protection feature (Photo Eyes)
4. Automatic safety reverse (On Down Operation Only)
