ASSEMBLY INSTRUCTION
Page 7
STEP 8: Attach The Post
.
Screw the 1/4
”
x2 3/4
”
threaded ends stud into
emitter top.
Attach the reflector dome cap and nut on the
emitter top. It screws on threaded stud screwed
onto emitter top.
Insert gas hose through post.
Attach the post on to heater head with four of
3/16
”
truss head screw.
STEP 7. Attach Reflector
Combine three pieces reflector together
Tighten up with three 5/32
”
screws.
Put the reflector plate on reflector then tight up with
three 1/4
”
screw by upward.
STEP 7
STEP 8
Summary of Contents for PTH-103-3G
Page 5: ......