4
02-2018
Step 3
Repeat the pattern from step 1. Check that
stones are level. There should be 12 inches
between the stone and top of the frame. Use
included shims for adjustments. Glue the cut
ends of the blocks to the tank and drawer
frame.
Use
(7)
12 x 8 x 4 blocks
Use
(1)
8 x 8 x 4 blocks
Use
(2)
4 x 8 x 4 blocks
Use
(2)
4 x 8 x 6.125 blocks
Step 4
Lay out the fourth layer as shown in the dia-
gram. Check that stones are level. There should
be 8 inches between the stone and top of the
frame. Use included shims for adjustments.
Glue the cut ends of the blocks to the tank and
drawer frames.
Use
(9)
12 x 8 x 4 blocks
Use
(2)
4 x 8 x 2.125 blocks
Step 5
Repeat patterns from Steps 3 & 4. Make sure
this layer is flush with the top of the frame.
Glue the cut ends of the blocks to the tank
and drawer frames.
If installing with the Side Burner, do so on
the right-hand side of the Napoleon BBQ
Grill.
Use
(16)
12 x 8 x 4 blocks
Use
(1)
8 x 8 x 4 blocks
Use
(2)
4 x 8 x 4 blocks
Use
(2)
4 x 8 x 6.125 blocks
Use
(2)
4 x 8 x 2.125 blocks
Remove this block if installing
Side Burner beside Napoleon
BBQ Grill
