Napoleon PATIOFLAME HAMP1, Manual

Page: 17 / 64

17
EN
www.napoleongrills.com N415-0388 MAY09.18
Cleaning The Outer Appliance Surface : Do not use abrasive cleaners or steel wool on any painted, or
stainless steel parts of your Napoleon Appliance. Doing so will scratch the finish. Exterior surfaces should
be cleaned with warm soapy water. To clean stainless surfaces, use a stainless steel or a non-abrasive
cleaner. Always wipe in the direction of the grain. Over time, stainless steel parts discolor when heated,
usually to a golden or brown hue. This discoloration is normal and does not affect the performance of the
appliance
WARNING!
The appliance area must be clear and free from combustible materials, gasoline and
other flammable vapors and liquids. Do not obstruct the flow of combustion and ventilation air. Keep
the ventilation opening of the cylinder enclosure free and clear of debris.
Reinstallation : Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
installing. Replace the glass embers. When the appliance is put back in service, check the burner flame
pattern with the image below.
NORMAL
ABNORMAL