W415-1867 / B / 02.07.19
EN
12
remote control layout
5.4 temperature
display
A. With the system in the
off
position, press the
temperature key
and the
mode key
at the same time to change from degrees F to
C.
B. Look at the LCD screen on the transmitter to verify that a C or F is
visible to the right of the room temperature display.
73
23
°F
°C
5.5 fl ame height
5.6 blower
speed
If the appliance is equipped with a hot air circulating fan, the speed of
the fan can be controlled by the remote system. The fan speed can be
adjusted through six (6) speeds.
A. Use
the
mode key
to guide you to the fan control icon.
B. Use
the
up/down arrow keys
to turn
on/off
or adjust the fan
speed. A single “beep” will confi rm reception of the command.
76
°F
68
76
°F
Hi
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
burner has been turned on and remain on twelve minutes after it has been turned off.
note:
The remote control has six (6) fl ame levels. With the system on and the fl ame level at the maximum, press the
down arrow key
once and it will reduce the fl ame height by one step until the fl ame is turned off.
The
up arrow key
will increase the fl ame height each time it is pressed. If the
up arrow key
is pressed while
the system is on but the fl ame is off, the fl ame will come on at the high position. A single “beep” will confi rm
reception of the command.
76
°F
OFF
76
°F
76
°F
76
°F
Hi
Flame Off
Flame at level 1
Flame at level 5
Flame at “Hi” level 6
ADD TITLE: Night Light Dimmer Control
76
°F
OFF
76
°F
The auxiliary function controls the
Night Light™
with dimmable control.
A. Use
the
mode key
to guide you to the
Night Light™
icon.
B. The intensity of the output can be adjusted through 6 levels.
Use the
up/down arrow keys
to adjust the output level. A single beep
will confi rm reception of the command.
5.7
night light dimmer control
ADD TITLE: IN THE EVENT OF A POWER FAILURE
If the receiver is equipped with batteries they will enable fl ame height control or
on/off
function to control the
appliance during a power failure. Blower and
Night Light™
operation is not possible. Refer to
“appliance
operation”
section when communications between receiver and transmitter have been lost. The receiver will
emit a “beep” sound to confi rm programming has been successful once power is restored. During a power
failure, if the appliance was on, the fl ame height will stay at the setting prior to the failure. If off when the failure
occurs and then turned on, the fl ame height will come on at
“Hi”
. The fl ame height can then be controlled by the
remote.
5.8
in the event of a power failure
note:
Your new fi replace includes a night light that allows you to enjoy the appearance of your fi replace when the
fl ames are not on.
note:
Please note the night light is not designed to be in used whilst the fi replace is burning. The fi replace, logs, and
fl ame have been designed to produce the most aesthetically appealing look without the need of the night light.
If the night light is used at the same time as the fi replace is burning, the life time of the night light bulb will be
signifi cantly reduced and the need to replace the bulb will become more frequent.
When the desired blower speed is selected, the blower will automatically come on 5 minutes after the main
burner has been turned on and remain on twelve minutes after it has been turned off (thermostat mode only).