Napoleon GSS42CFN, Installation And Operation Manual

Page: 19 / 60

EN
W415-2975 / 09.02.21
19
fi nishing
8.5 logo placement
We recommend all mantels made from non-combustible material. If using combustible materials, follow the chart
below.
8.6 minimum mantel clearances
Remove the backing of the logo supplied. Centre the logo on the front of the appliance, ½” (12.7mm) in from the
left side, as shown.
• Risk of fi re. Maintain specifi ed air space clearances to combustibles. Failure to comply with these instructions
may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top, vent, mantel,
front, etc.) are clearly maintained.
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
note:
Mantel temperatures will rise above normal tempera-
tures and may be hot to the touch.