W415-2164 / A / 07.21.16
13
EN
IMPORTANT
IT IS HIGHLY RECOMMENDED TO PROTECT THE LOGS FROM MOISTURE.
COVER THE FIREBOX WHEN NOT IN USE.
5
PINS
PINS
PORT CAVITY
E.
Position the slot in the bottom of the right
log (W135-0670) onto the bracket beside the
burner on the right, with the charred face of
the log to the front.
5.2 GLOWING EMBERS (OPTIONAL)
5.3 CHARCOAL LUMPS/LAVA ROCK
A.
Place lava rock around the base of the fireplace,
making sure not to block any burner ports or valve
access. Retain a small amount of lava rock for step C.
B.
Place formed charcoal lumps around the front and
sides of the unit.
C.
Use remaining lava rock to blend with the charcoal
lumps.
A
B
C
D
E
Glowing embers (not supplied) may be used to enhance the flame’s appearance. Tear the embers into pieces
and place along the front row of ports covering all of the burner area in front of the small logs. Care should
be taken to shred the embers into thin, small irregular pieces as only the exposed edges of the fibre hairs will
glow.
The ember material will only glow when exposed to direct flame; however, care should be taken
to not block the burner ports.
Blocked burner ports can cause an incorrect flame pattern, carbon deposits and delayed ignition.
PHAZER
TM
logs glow when exposed to direct flame. Use only certified "glowing embers" and
PHAZER
TM
logs available
from your authorized dealer / distributor.
5
PINS
PINS
PORT CAVITY
5
PINS
PINS
PORT CAVITY
A
B
C
D
E
F
F.
Position log F (W135-0481) in front of the
front row of burner ports, and allow it to rest
against the backside of the grate assembly.
