EN
W415-1454 / G / 04.01.19
15
operating instructions
4.3
remote control battery installation
1. To replace the existing battery, remove the battery
holder.
2. To remove the battery holder, turn the remote onto its
front side. Slide the battery holder outwards.
3. Replace the existing battery holder with a new battery
(type CR 2025). Slide the battery holder back into
position.
4. The battery holder is secure onto the remote control
when a "CLICKING" noise is heard.
Remote
Control
(Rear Side)
Battery (CR 2025)
Battery Holder
!
WARNING
•
This remote control requires button batteries that are hazardous to young children.
•
WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN.
•
Swallowing may lead to serious injury or death in as little as 2 hours due to chemical
burns and potential perforation to the oesophagus.
•
If you suspect your child has swallowed or inserted a button battery, immediately
seek urgent medical assistance.
•
Examine devices and make sure the battery compartment is correctly secured (i.e.
that the screw or other mechanical fastener is tightened). Do not use if compartment is not secure.
•
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
•
Tell others about the risks associated with button batteries and how to keep their children safe.
Batteries must be disposed of according to the local laws and regulations. Some batteries may be
recycled, and may be accepted for disposal at your local recycling center. Check with your
municipality for recycling instructions.