17
EN
www.napoleongrills.com
N415-0542 DEC 11.18
BUILT-IN UNIT OPENING DIMENSIONS
MODEL
OPENING DIMENSIONS
NOTES
W
D
H
BIPRO665
38”
965mm
20 5/8”
524mm
8 7/8”
225mm
SIDE BURNER
N370-0504 -LPG
N370-0505 -NAT
12 3/4”
324mm
16 1/2”
419mm
4 1/2”
114mm
OPENING OF AT LEAST 5 SQ IN MUST BE PROVIDED FOR
COMBUS
TION AIR FOR SIDE BURNER.
WARNING!
This grill is designed for Non-combustible enclosures only, and must be installed and
serviced by a qualified installer to local codes.
WARNING!
Use only non-combustible materials (certified to ASTM E-136) such as steel studs,
cement board, ceramic tile, marble, paint etc. When adding finishing materials to the appliance.
Do not use wood or drywall.
W
W
H
D
W
H
D
1¾”
(44mm)
BUILT-IN SIDEBURNER
GAS INLET OPENING
NON-C
OMBUS
TIBLE MA
TERIAL
OUTDOOR GFI ELECTRICAL
OUTLET REC
OMMENDED -
LOCATE ON SAME SIDE OF
GRILL AS ROTISSERIE BRACKET.
GAS INLET OPENING
Note: Accessory frames
overlap opening by 1 ¾”
on all 4 sides.
5” (127mm)
1¾”
(44mm)
IF THE COUNTER TOP IS OVERHANGING THE EDGE OF
THE ENCLOSURE THE CORNERS MUST BE NOTCHED
A MINIMUM OF 1 3/16" (30 mm) TO ACCOMODATE
THE CONTROL PANEL END CAPS.
WARNING!
A propane tank can not be
stored below the gas grill.
MINIMUM 10 SQ IN OF
VENTILATION REQUIRED
ON EACH END OF CABINET
WARNING!
CABINET FRAME, CABINET AND COUNTER TOP MUST BE
MADE FROM NON-COMBUSTIBLE MATERIAL.
34” (864mm)
RECOMMENDED
ELECTRICAL OPENING
ELECTRICAL OPENING
2" (51mm)
4” (102mm)
!
!
!
!
N415-0542 DEC 11.18.indd 17
12/13/2018 11:04:03 AM
