Napoleon BIP450RB, Instruction Manual

Page: 7 / 26

7
LIGHTING PORT
HOLE
LEFT
BURNER
CENTRE
BURNER
IGNITOR
REAR
BURNER
RIGHT
BURNER
7. LIGHTING INSTRUCTIONS
Open lid.
Ensuring burner controls are in
the off position, turn on the gas
supply valve.
Do not use back burner while operating left, centre or right burner.
The propane cylinder is equipped with an excess flow device. Unless all burners are
turned off prior to turning the cylinder on, only small flames will be achievable.
Back Burner Lighting
Main Burner Lighting Side Burner Lighting
Remove warming rack.
Turn igniter knob clock-
wise several times or light
by holding a lit match to
the left side burner ports.
Turn left burner control
to high position.
Open burner cover.
Turn igniter knob clock-
wise several times or light
by inserting a lit match
through a lighting hole.
Turn side burner control
to high position.
Turn back burner control
to high position.
If ignition is not immediate,
turn the burner control off.
Wait 5 minutes.
Push igniter several times
or light by holding a lit
match against the burner.
If ignition is not immediate,
turn the burner control off.
Wait 5 minutes.
With the left burner operat-
ing in the high position, turn
the centre burner to high,
then the right burner to high.
If ignition is not immedi-
ate, turn the burner
control off. Wait 5
minutes.