W415-1994 / C / 07.11.19
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon.com
!
WARNING
•
Do not touch safety barrier until cooled.
•
Allow safety barrier and appliance to cool completely before performing any maintenance as they will remain hot
after appliance is no longer operating.
•
To avoid danger of suffocation, keep the packaging bag away from babies and children. Do not use in cribs, beds,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
Element Installation Instructions for Models AX36 & AX42
You will need:
Installer:
Leave this leafl et with the appliance.
Consumer:
Retain this leafl et for future reference.
This accessory is available in Arched and Square styles.
Installation instructions are the same for both.
The Element
MUST
be used with a front.
See table below for details on compatibility:
Accessory
Finishing
Trim
Whitney
Front
Denali
Front
Square
Element
Arched
Element
2
4
5
7
Place face down on
a soft, non-abrasive
surface.
With the Element installed, re-install the
fi nishing trim, Whitney front, or Denali
front onto the safety barrier, and then
re-install the safety barrier onto the
appliance.
See “Optional Front Accessories
Installation Instructions”
leafl et for details.
1
If applicable, remove the safety barrier from the
appliance, and then remove the fi nishing trim,
Whitney front, or Denali front from the safety barrier.
See “Optional Front Accessories Installation
Instructions” leafl et for details.
Whitney Front and Arched
Element illustrated.
NOTE: To avoid
scratching, do not drag
the Element across the
surface of the
fi nishing trim / front
during installation.
Apply 4 felt pads
(supplied) where
circled above.
6
3
Rear V
iew of Element
Felt
Pad
