NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from manufacturing defects in materials and
workmanship for thirty-six months following the date of manufacture. NAPCO will, within said period, at its option, repair or
replace any product failing to operate correctly without charge to the original purchaser or user.
This warranty shall not apply to any equipment, or any part thereof, which has been repaired by others, improperly installed,
improperly used, abused, altered, damaged, subjected to acts of God, or on which any serial numbers have been altered,
defaced or removed. Seller will not be responsible for any dismantling or reinstallation charges.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO
EXPRESS OR IMPLIED WARRANTY OF MERCHANT ABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. ADDITIONALLY,
THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF NAPCO.
Any action for breach of warranty, including but not limited to any implied warranty of merchant ability, must be brought within the six months following
the end of the warranty period.
IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.
In case of defect, contact the security professional who installed and maintains your security system. In order to exercise the warranty, the product
must be returned by the security professional, shipping costs prepaid and insured to NAPCO. After repair or replacement, NAPCO assumes the cost
of returning products under warranty. NAPCO shall have no obligation under this warranty, or otherwise, if the product has been repaired by others,
improperly installed, improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any serial
numbers have been altered, defaced or removed. NAPCO will not be responsible for any dismantling, reassembly or reinstallation charges.
This warranty contains the entire warranty. It is the sole warranty and any prior agreements or representations, whether oral or written, are either
merged herein or are expressly canceled. NAPCO neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to
change, or to assume for it, any other warranty or liability concerning its products. In no event shall NAPCO be liable for an amount in excess of
NAPCO's original selling price of the product, for any loss or damage, whether direct, indirect, incidental, consequential, or otherwise arising out of any
failure of the product. Seller's warranty, as herein above set forth, shall not be enlarged, diminished or affected by and no obligation or liability shall
arise or grow out of Seller's rendering of technical advice or service in connection with Buyer's order of the goods furnished thereunder.
NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY.
Warning: Despite frequent testing, and due to, but not limited to, any or all of the following; criminal tampering, electrical or communications disruption,
it is possible for the system to fail to perform as expected. NAPCO does not represent that the product/system may not be compromised or
circumvented; or that the product or system will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; nor that the product
or system will in all cases provide adequate warning or protection. A properly installed and maintained alarm may only reduce risk of burglary, robbery,
fire or otherwise but it is not insurance or a guarantee that these events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore,
the installer should in turn advise the consumer to take any and all precautions for his or her safety including, but not limited to, fleeing the premises
and calling police or fire department, in order to mitigate the possibilities of harm and/or damage.
NAPCO is not an insurer of either the property or safety of the user's family or employees, and limits its liability for any lo ss or damage including
incidental or consequential damages to NAPCO's original selling price of the product regardless of the cause of such loss or damage.
Some states do not allow limitations on how long an implied warranty lasts or do not allow the exclusion or limitation of incidental or consequential
damages, or differentiate in their treatment of limitations of liability for ordinary or gross negligence, so the above limitations or exclusions may not
apply to you. This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.
NAPCO SECURITY LIMITED WARRANTY
R
of lens foil (supplied) to the inside segment of the lens repre-
senting that zone.
Installations with Pets
The PIR1680 will provide good immunity to small pets in most
applications. The pet or pets should be small (less than 20 lbs.).
Several small cats are acceptable. If you have three or more
large ones, we recommend that the NAPCO C200AP dual
technology sensor be used. Mount the unit as high as possible.
If the unit is above a chair or other piece of furniture that the pet
may climb onto, mask the look down beam. Make certain the
sensitivity (SEN) jumper is off (normal sensitivity). If a stair case
is in the field of view and closer than 20 ft. from the unit, it may
be necessary to mask that beam.
REPLACING THE LENS
The lens is mounted behind a Lens Support insert that fits inside
the front cover. To install one of the accessory lenses, proceed
as follows:
1. Carefully lift the lens cover
from the housing.
2. While pushing the lens in at
the top, with fingers straddling
the LED jewel, press down at
the top of the Lens Support as
shown until the support clears
the three top retainers. Be care-
ful not to dislodge the look
down-lens window.
2. Push the Lens Support up until it clears the three bottom
retainers and remove the assembly.
3. Slide out the lens.
4. Install the replacement lens with the grooved side in and the
with the lens not in the up side down position. All lenses are
marked with with the word top stamped on the border, this may
be difficult to see, so as a rule put the taller lens segments up.
5. Install the retainer assembly into the front cover. Slip the Lens
Support behind the lower retainers, then push in at the top until
the Lens Support snaps into place.
COMPLETING THE INSTALLATION
Allow at least three minutes for the unit to stabilize after apply-
ing power, during this time the unit will perform its own self diag-
nostics and set a baseline detection level. The LED will flash
rapidly for approximately 1 minute and not function until the unit
is ready. If the unit was installed after being kept in a hot or cold
vehicle allow the unit to operate with its cover in place for about
15 minutes. This will insure that the unit has measured the
proper room temperature. Walk test the unit to insure the de-
sired coverage, making any board height adjustments that may
be necessary. Note: One common cause of short range is hav-
ing the lens in up side down, always check this! During walk
test, the unit will go into a zone finding mode for 15 seconds
after each trip. This will cause the LED to light each time a
beam is entered. To view the normal detection pattern remain
motionless for at least 15 seconds between walk tests.
