NAPCO Security Systems
LIBRA LIB-P432EX Series Programming Instructions
Page 31
ZONE OPTIONS - ZONES 1 TO 16 (ADDRESS 0900-1016)
ZONES 1 8
ZONES 9 16
ZONE OPTIONS
ADDR Z1 Z2 Z3 Z4 Z5 Z6 Z7 Z8 ADDR Z9 Z10 Z11 Z12 Z13 Z14 Z15 Z16
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
§
50ms Loop Response
0900
0964
Priority
0901
0965
Priority with Bypass
0902
0966
Auto-Bypass
0903
0967
Selective Bypass
0904
0968
Keyswitch Arming
0905
0969
Auto-Bypass Re-entry
0906
0970
Pre-Alarm Warning
0907
0971
Never Arm
0908
0972
24-Hour Zone
0909
0973
Alarm Output
0910
0974
Pulsed Alarm Output
0911
0975
PGM1 Output
0912
0976
PGM2 Output
0913
0977
Entry/Exit 1
0914
0978
Entry/Exit 2
0915
0979
Exit/Entry Follower
0916
0980
Auto Reset
0917
0981
Swinger Shutdown
0918
0982
Chime
0919
0983
Abort Delay
0920
0984
Power-up Delay
0921
0985
Day Zone Open
0922
0986
Day Zone Short
0923
0987
Alarm on Day Zone
0924
0988
Alarm Telco 1
0925
0989
Alarm Restore 1
0926
0990
Trouble Telco 1
0927
0991
Trouble Restore 1
0928
0992
Alarm Telco 3
0929
0993
Alarm Restore 3
0930
0994
Trouble Telco 3
0931
0995
Trouble Restore 3
0932
0996
No EOL Resistor
0933
0997
Trouble on Open
0934
0998
Trouble on Short
0935
0999
Zone Area 1
0936
1000
Zone Area 2
0937
1001
Zone Area 3
0938
1002
Keypad Sounder on Alarm
0941
1005
2-Wire Smoke Detectors
0942
1006
Fire
0943
1007
Fire Alarm Verification
0944
1008
RESERVED
0945
1009
Zone ANDing Group 1
0946
1010
Zone ANDing Group 2
0947
1011
Zone ANDing Group 3
0948
1012
Zone ANDing Group 4
0949
1013
Sensor Watch
0950
1014
RESERVED
0951
1015
Chime 2
0952
1016
NOTES:
§
50ms Loop Response only available for zones 1-4. If Zone Doubling is enabled, Zones 9-12 will follow the loop response programming for Zones
1-4. For all other Zones, loop response is determined by jumpers on the GEM-EZM8 and/or keypad configuration on the GEM-DXRP1 or GEM-
DXK1.
When the Easy Program Menu is used, these features are enabled by default.
Enabled when "Enable SIA CP-01 Features?" is activated (Answer "Yes" in the EZ Programming Menu).
Disabled when "Enable SIA CP-01 Features?" is activated (Answer "Yes" in the EZ Programming Menu). Disable Auto-Reset on non-fire zones for SIA CP-01
installations.
Interior (Stay) Bypass
0940
1004
Zone Area 4
0939
1003
ZONE OPTIONS:
Select zone options for any zone.
1. Select the desired zone option by entering the option number (1-8) for each selected zone.
2. Enter corresponding option number in address location.
NOTE:
Dark shaded data value box shows option not available. Press
u
to save.
