13
F I R E P R O T E C T I O N
(Applicable only where local ordinance permits use of this alarm control panel for fire protection.)
Fire-Zone Alarm
If a fire is detected, “reset FIRE ALARM” icon will flash and the keypad sounder will
pulse.
1.
If a fire is in progress, evacuate the premises immediately! If necessary, call the
Fire Department from an outside phone.
2.
Press the
C
button to silence the keypad sounder.
3.
If there is no evidence of a fire, enter your User Code and press
J
to turn off the
alarm.
4.
Check smoke detector(s). If a smoke detector tripped, its red alarm indicator light
will be on.
After the alarm condition is corrected (thermostat cooled down; smoke cleared from
detector; etc.), pressing
C
again will reset the keypad within about 10 seconds.
Fire-Zone Trouble
1.
If a problem in the fire-circuit is detected, “TROUBLE” (fire trouble) will display and
the sounder will pulse to signal a malfunction.
2.
Press
C
to silence the sounder.
Call for service immediately!
Note:
Trouble Error Code E41 will only display for the GEM-P1664/P1632 & P816
control panels.
r e s e t F I R E A L A R M
A C O N
FIRE/
ZONEXX
T R O U B L E
A C O N
TRBL/
E41-XX
Summary of Contents for Gemini GEM-RP2ASe2
Page 24: ...24 NOTES...
