Step 5. Reinstall the GEM HEAT into the mounting plate.
Align the mounting screws with the mounting holes in the
base. Push down and turn clockwise until the GEM-HEAT
snaps into place.
Step 6.
Map the GEM-HEAT Transmitter
Referring to the installation instructions for the control panel
and keypad in use, enter the following:
•
The zone to which the transmitter will be mapped.
Note:
This zone must be programmed as a Fire Zone
as per the control panel installation instructions.
•
The 6-digit RF identification number / 1 digit checksum
number printed on the transmitter (include all numbers
and/or letters and leading zeros, if any);
•
The transmitter point number (“1”).
Step 7. Testing the system
Test system with unit mounted. If the system is monitored,
notify central station of impending test.
The rate-of-rise feature may be tested by a quick application of
heat from any convenient source. A portable hair dryer is
recommended. However, do not apply heat which exceeds the
fixed temperature rating of the detector. If the fixed tempera-
ture is exceeded, the center disk of the detector will drop and
the detector must he replaced.
Apply the heat until the local alarm sounds. Verify that the
GEM-HEAT has triggered the correct zone and that the correct
report has been transmitted to central station. Wait a few
minutes and reset the fire circuit. Insure that the system
returns to a normal status.
WARNINGS
•
HEAT DETECTORS ARE NOT LIFE SAFETY DEVICES:
USE FOR PROPERTY PROTECTION ONLY.
•
WHERE LIFE SAFETY IS REQUIRED, SMOKE
DETECTORS MUST ALSO BE USED.
•
BATTERY BACK-UP: HEAT DETECTORS SHOULD BE
ELECTRONICALLY SUPERVISED WITH BATTERY
BACKUP AT THE PANEL.
•
THE RATE-OF-RISE MECHANISM MAYBE SUBJECT
TO REDUCED SENSITIVITY OVER TIME. ANNUAL
TESTING OF THE RATE-OF-RISE OPERATION IS
RECOMMENDED.
•
REFER TO NFPA STANDARD 72 FOR APPLICATION
REQUIREMENTS, TESTING AND MAINTENANCE.
•
DO NOT PAINT THE GEM-HEAT.
NAPCO LIMITED WARRANTY
NAPCO SECURITY SYSTEMS, INC. (NAPCO) warrants its products to be free from
manufacturing defects in materials and workmanship for thirty-six months following
the date of manufacture. NAPCO will, within said period, at its option, repair or
replace any product failing to operate correctly without charge to the original
purchaser or user.
This warranty shall not apply to any equipment, or any part thereof, which has been
repaired by others, improperly installed, improperly used, abused, altered, damaged,
subjected to acts of God, or on which any serial numbers have been altered, defaced
or removed. Seller will not be responsible for any dismantling or reinstallation
charges.
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS
OR IMPLIED WARRANTY OF MERCHANTABILITY OR A WARRANTY OF FIT-
NESS FOR A PARTICULAR PURPOSE. ADDITIONALLY, THIS WARRANTY IS IN
LIEU OF ALL OTHER OBLIGATIONS OR LIABILITIES ON THE PART OF NAPCO.
Any action for breach of warranty, including but not limited to any implied warranty of
merchantability, must be brought within the six months following the end of the
warranty period. IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, EVEN IF THE LOSS OR DAMAGE
IS CAUSED BY THE SELLER'S OWN NEGLIGENCE OR FAULT.
In case of defect, contact the security professional who installed and maintains your
security system. In order to exercise the warranty, the product must be returned by
the security professional, shipping costs prepaid and insured to NAPCO. After repair
or replacement, NAPCO assumes the cost of returning products under warranty.
NAPCO shall have no obligation under this warranty, or otherwise, if the product has
been repaired by others, improperly installed, improperly used, abused, altered,
damaged, subjected to accident, nuisance, flood, fire or acts of God, or on which any
serial numbers have been altered, defaced or removed. NAPCO will not be respon-
sible for any dismantling, reassembly or reinstallation charges.
This warranty contains the entire warranty. It is the sole warranty and any prior
agreements or representations, whether oral or written, are either merged herein or
are expressly cancelled. NAPCO neither assumes, nor authorizes any other person
purporting to act on its behalf to modify, to change, or to assume for it, any other
warranty or liability concerning its products.
In no event shall NAPCO be liable for an amount in excess of NAPCO's original
selling price of the product, for any loss or damage, whether direct, indirect,
incidental, consequential, or otherwise arising out of any failure of the product.
Seller's warranty, as hereinabove set forth, shall not be enlarged, diminished or
affected by and no obligation or liability shall arise or grow out of Seller's rendering
of technical advice or service in connection with Buyer's order of the goods furnished
hereunder.
NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY
TESTED WEEKLY.
Warning: Despite frequent testing, and due to, but not limited to, any or all of the
following; criminal tampering, electrical or communications disruption, it is possible
for the system to fail to perform as expected. NAPCO does not represent that the
product/system may not be compromised or circumvented; or that the product or
system will prevent any personal injury or property loss by burglary, robbery, fire or
otherwise; nor that the product or system will in all cases provide adequate warning
or protection. A properly installed and maintained alarm may only reduce risk of
burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these
events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY
FOR ANY PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS
BASED ON A CLAIM THE PRODUCT FAILED TO GIVE WARNING. Therefore, the
installer should in turn advise the consumer to take any and all precautions for his or
her safety including, but not limited to, fleeing the premises and calling police or fire
department, in order to mitigate the possibilities of harm and/or damage.
NAPCO is not an insurer of either the property or safety of the user's family or
employees, and limits its liability for any loss or damage including incidental or
consequential damages to NAPCO's original selling price of the product regardless
of the cause of such loss or damage.
Some states do not allow limitations on how long an implied warranty lasts or
do not allow the exclusion or limitation of incidental or consequential dam-
ages, or differentiate in their treatment of limitations of liability for ordinary or
gross negligence, so the above limitations or exclusions may not apply to
you. This Warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
