background image

14

WARRANTY

NAPCO 

warrants its products against defects in material or in workmanship when used under appropriate

conditions and in accordance with appropriate operating instructions for a period of no less than one
(1) year from the date of delivery of the products.

The sole obligation of 

NAPCO 

shall be to repair or replace at our option, FOB factory or locally, without

charge, any part(s) that prove defective within the warranty period, provided that the customer notifies

NAPCO 

promptly and in writing of any such defect. Compensation for labor by other than 

NAPCO

employees will not be our obligation. Part(s) replacement does not constitute an extension of the
original warranty period.

NAPCO 

makes no warranty of merchantability, fitness for a particular purpose, or any other warranty,

express or implied, as to the design, sale, installation, or use of its products, and shall not be liable for
consequential damages resulting from the use of its products.

NAPCO 

will not assume responsibility for unauthorized repairs or failure as a result of unauthorized

repairs, replacement, or modifications made negligently or otherwise improperly made or performed
by persons other than 

NAPCO 

employees or authorized representatives.

While our personnel are available to advise customers concerning general application of all manufactured
products, oral representations are not warranties with respect to particular application and should not
be relied upon if inconsistent with product specification or the terms stated herein.

In any event, the terms and conditions continued in 

NAPCO

, formal sales contracts shall be controlling;

and any changes must be in writing and signed by an authorized executive of 

NAPCO.

All defective components will be replaced without charge for one (1) year from the date of delivery.
There will be no charge for labor if the apparatus is returned to the factory prepaid.

Conditions and qualifications of the warranty statement shall prevail at all times.

Summary of Contents for 5831




















Reviews: