Napa 791-6006 Operating Manual & Parts List Download Page 1

791-6006 

rev. 04/04/18

Capacity  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 Ton
Overall Length   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18"
Shipping Weight  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.3 lbs.

SPECIFICATIONS

MODEL # 791-6006

3/4 TON CAPACITY 

LOAD LEVELER

WARNING

BEFORE USING THIS DEVICE, READ THIS 
MANUAL COMPLETELY AND THOROUGHLY, 
UNDERSTAND ITS OPERATING  
PROCEDURES, SAFETY WARNINGS AND 
MAINTENANCE REQUIREMENTS.

It is the responsibility of the device owner to make sure all 
personnel read this manual prior to using the device. It is also 
the responsibility of the device owner to keep this manual 
intact and in a convenient location for all to see and read. If the 
manual or product labels are lost or not legible, contact NAPA for 
replacements. If the operator is not fluent in English, the product 
and safety instructions shall be read to and discussed with the 
operator in the operator's native language by the purchaser/owner 
or his designee, making sure that the operator comprehends 
its contents.

• Read, study, understand & follow all instructions before 

using. • Inspect before each use.  Do not use if damaged, 

altered, modified, in poor condition or has loose or missing 

components.  Take corrective action before using. • Do not 

exceed rated capacity. • This product was not designed for 

overhead lifting applications.  Stay out from under a load 

being lifted or suspended. • Do not spread the load bearing 

chains more than a total of 90°. • Wear eye protection that 

meets ANSI Z87.1 and OSHA standar • Assure the load is 

secured to the device. • Attach all four chains to the load 

being lifted. • No alterations shall be made to this device.

• Failure to heed these warnings may result in serious 

or fatal personal injury and/or property damage.

        

WARNING:

 This product can expose you to chemicals 

        including nickel, which is known to the State of 

        California to cause cancer and birth defects or other 

        reproductive harm.  For more information go to

        www.P65Warnings.ca.gov.

 

 S

AFE

TY

  

STAND

AR

D

   

   

CO

MPL

IES

  

ITH

W

ASME PASE-2014

Summary of Contents for 791-6006











Reviews: