GB/
24
design D. D’URBINO P.LOMAZZI coll. CASATI
QUASAR
!
ASSEMBLY
•
Before starting assembling operation place the frame of the dining table in the desired position and acting on the adjustable
feet with a level take care of having the frame in the horizontal position.
•
Screw the metal plate to the central top orientatiing it as shown in FIG.V with the the four screws A Ø6x12mm.
•
Place the two springs into the holes of the brass metal plate. FIG.VII
•
Insert the pivots of the central top into the special holes of the brass metal plate. FIG.VII
•
WARNING!
DISPLAY THE CENTRAL TOP SO THAT THE MAKERS (
X
) INDICATED IN THE HOLE
OF THE BRASS METAL PLACE AND IN THE SHORT PIVOT FIT TOGETHER.
•
Fix the lateral tops orientating them as shown in pict.IX without tightening the screws B Ø8x115mm FIG.IX-X
Ø8x115mm
B
b
a
b>a
FIG.IX
FIG.X
X
X
FIG.V
FIG.VI
FIG.VII
FIG.VIII
A
Ø6x12mm
