ASSEMBLY INSTRUCTIONS
4
3
Select part 3, 4, and
Screws E (12). Confirm
part 4 is facing up and
the widest support at
the ends is up. Part 3
the supports are
down and handle
curve toward part 4.
Insert (3) E screws
through hinge holes
and affix 3 to the
hinge connected to
part 4.
Select Screws E
(12). Turn over
assembly of 3 and
4 so the longest
support is facing
up. With the
handle toward the
center of the
sandbox place the
assembly on the
sandbox. Affix the
cover assembly
door/bench too
the sandbox with
(3) Screws E
through the hinge
holes. Repeat 3
additional hinges.
Page 5 of 8
E
3
3
4
4
x 12
x 12
E