10
11
・イラスト6-1
・イラスト7-1
・イラスト8-1
・イラスト9-1
・イラスト10-1
・イラスト̲0527追加分
Rear Sight
Rear Sight
Front Sight
Front Sight
The larger curvature sides
should be facing each other.
Convex
Surface
Ⓓ
Ⓔ
Ⓕ
Ⓙ
Ⓘ
Ⓚ
Ⓚ
Ⓝ
Screw (short)
Telescope Tube
Eyepiece
ⒼEyepiece
Attachment
Ⓝ
Screw (short)
Ⓕ
Ⓝ
Screw (short)
Ⓝ
Screw (short)
Eyepiece
Guide Ring
Ⓠ
grip
Attach the Eye Pad in this orientation.
Attach the Eye Pad in this orientation.
The position of the Tripod mount
・イラスト6-1
・イラスト7-1
・イラスト8-1
・イラスト9-1
・イラスト10-1
・イラスト̲0527追加分
Rear Sight
Rear Sight
Front Sight
Front Sight
The larger curvature sides
should be facing each other.
Convex
Surface
Ⓓ
Ⓔ
Ⓕ
Ⓙ
Ⓘ
Ⓚ
Ⓚ
Ⓝ
Screw (short)
Telescope Tube
Eyepiece
ⒼEyepiece
Attachment
Ⓝ
Screw (short)
Ⓕ
Ⓝ
Screw (short)
Ⓝ
Screw (short)
Eyepiece
Guide Ring
Ⓠ
grip
Attach the Eye Pad in this orientation.
Attach the Eye Pad in this orientation.
The position of the Tripod mount
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
Mounting the Tripod Connection Nut
3
Assembly Procedure 2
[Eyepieces]
This kit contains the parts for two eyepieces.
Please check the combination of lenses and Housing parts.
Place the
Tripod Connection Nut
Ⓛ into the hexagon shaped pit.
1.
First, determine the sides
of the lenses. Each lens
has a flat side and a convex
(bulged) side. If you place a
lens in the wrong orientation,
the telescope will not work
correctly.
2.
Disassemble the combined
Eyepiece Housings
Ⓓ
and Ⓔ, and mount the two lenses for each in the
slots engraved inside of them. Refer to the figure
carefully.
In
Eyepiece
Ⓓ (large), the convex side of both lenses
faces toward the wide opening of the Housing. In
Eyepiece
Ⓔ (small), the two lenses' convex sides
should face inside toward each other.
3.
Fit the two sides of the eyepiece housings together.
Take care not to let the lenses shift out of position.
4.
Insert two
screws (short)
Ⓝ in the holes on each
eyepiece marked in the picture and tighten to hold
the parts of the Eyepieces firmly together.
5.
Attach the
Eye PadⒻ
to the tip of each eyepiece.
1.
Fit the two sides of the
Draw Tube
Ⓒ together.
2.
Set the assembled
Draw Tube
Ⓒ in the
Body Tube
Ⓐ.
Let the grip of the Draw Tube stick out, and fit the screw threads on the outside of the Draw
Tube into the threads on the inside of the Body Tube.
1.
Fit the left side of the
Body Tube
Ⓐ over the right half.
Take care not to let the lens or the nut shift out of position.
2.
Attach the
Lock Ring
Ⓑ to the bottom of the Body TubeⒶ to join the parts.
3.
Insert four
screws (long)
Ⓜ in the holes marked in the picture and tighten to hold the parts of
the
Body Tube
Ⓐ firmly together.
●
Eyepiece (large) : Magnification 16X
ⒹEyepiece (large)
Ⓘφ20mm Flat-Convex lens +
Ⓙφ10mm Flat-Convex lens
The convex surface of each lens should
face forward.
ⒻEye Pad (interchangeable)
●
Eyepiece (small) : Magnification 66X
ⒺEyepiece (small)
Ⓚφ8mm Convex-Convex lens (2 pieces)
The convex sides should be facing
each other.
ⒻEye Pad (interchangeable)
Assembling the Eyepieces
※Handle the lenses with extra care so as not to scratch or dirty them.
2
Combination of Lenses
1
Finishing the Telescope Tube
5
Assembling the Draw Tube
4
■Eyepiece (large)
■Eyepiece (small)
・イラスト6-1
・イラスト7-1
・イラスト8-1
・イラスト9-1
・イラスト10-1
・イラスト̲0527追加分
Rear Sight
Rear Sight
Front Sight
Front Sight
The larger curvature sides
should be facing each other.
Convex
Surface
Ⓓ
Ⓔ
Ⓕ
Ⓙ
Ⓘ
Ⓚ
Ⓚ
Ⓝ
Screw (short)
Telescope Tube
Eyepiece
ⒼEyepiece
Attachment
Ⓝ
Screw (short)
Ⓕ
Ⓝ
Screw (short)
Ⓝ
Screw (short)
Eyepiece
Guide Ring
Ⓠ
grip
Attach the Eye Pad in this orientation.
Attach the Eye Pad in this orientation.
The position of the Tripod mount
・イラスト6-1
・イラスト7-1
・イラスト8-1
・イラスト9-1
・イラスト10-1
・イラスト̲0527追加分
Rear Sight
Rear Sight
Front Sight
Front Sight
The larger curvature sides
should be facing each other.
Convex
Surface
Ⓓ
Ⓔ
Ⓕ
Ⓙ
Ⓘ
Ⓚ
Ⓚ
Ⓝ
Screw (short)
Telescope Tube
Eyepiece
ⒼEyepiece
Attachment
Ⓝ
Screw (short)
Ⓕ
Ⓝ
Screw (short)
Ⓝ
Screw (short)
Eyepiece
Guide Ring
Ⓠ
grip
Attach the Eye Pad in this orientation.
Attach the Eye Pad in this orientation.
The position of the Tripod mount
Assembly Procedure 3
[Attaching an Eyepiece to the Telescope Tube]
Assembly Procedure 4
[Making the Viewfinder easier to use]
Screw the
Eyepiece Attachment
Ⓖ
onto the end of the Telescope Tube.
Screw in to place.(Do not over-
tighten.)
The Viewfinder of this telescope consists of a
"Front Sight"
and a
"Rear
Sight"
. Putting a luminous sticker on the Front Sight will make it more
visible in dark places.
Push the Eyepiece into the
Attachment
Ⓖ. To detach, just pull it out.
This set contains two Eyepieces with different magnifications.
●
Eyepiece (large) : Magnification 16X
●
Eyepiece (small) : Magnification 66X
Changing the Eyepiece
2
Eyepiece Attachment
1
●
The "Front Sight" is the protrusion on the tip of the hood. Refer to
the figure to place the reflective sticker.
●
The Luminous Sticker is longer than the protrusion, so let it extend
out on the near side (towards the Eyepiece).
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
Eyepiece
Eyepiece
Attachment
Viewfinder
Draw Tube
Viewfinder
Body Tube
Ⓐ
Ⓑ
Ⓒ
Ⓙ
Ⓓ
Ⓖ
Ⓗ Ⓘ Ⓚ
Ⓔ
Ⓕ
Ⓜ
Ⓛ
Ⓟ
Ⓝ
Ⓠ
Ⓡ
・完成図
・イラスト3-1
・イラスト4-1
・イラスト4-2（1）
・イラスト5-2（1）
・イラスト4-2（2）
ⓂScrew (long)
Align the screw threads on the
outside of the Draw Tube and
the inside of the Body Tube.
Combine the Draw Tube parts Ⓒ
and set them in the Body, with
the wide side inside.
ⓂScrew (long)
ⓂScrew (long)
ⓂScrew (long)
ⓁTripod Connection Nut
ⒽPrimary Lens
Convex
Surface
Flat
1.
First of all, determine the front side of the
Primary Lens
Ⓗ.
This is actually a compound lens with two components. The thinner,
more curved component is on the front side.
2.
Put half of the
Body Tube
Ⓐ on the table with the inside facing up.
3.
Mount the
Primary Lens
Ⓗ at the slot engraved on the inside of the
hood (wider part).
Confirm the orientation of the lens.
Mounting the Primary Lens
※Handle the lens with extra care so as not to scratch or dirty it.
2
■Positions of the Primary Lens, Tripod Connection Nut, and Screws (long).
The thinner half of
the doublet lens
faces forward.
