background image

page

 16

Cautions when using disinfectant 

1.

2.
3.
4.
5.

6.

7.

8.

9.

Never mix disinfecting water with other disinfectant, abstergent and chemicals.
(But, it can be used with kitchen detergent in some case.)
If you have sensitive skin, wear protective equipment such as rubber gloves.
Do not use disinfectant in the cultivation of plants, animals, fish and shellfish, etc.
Be careful that the solution may bleach the colored textiles.
Be aware of the 

Corrosion-resistant table

 on the right side, so please wash it once with 

tap water after using.
Be sure to wash the 

Metal-drainage-pipe

 with tap water after using the large amount of 

disinfectant, because it may cause corrosion.
Chlorine  concentration  may  be  degraded  by  ultraviolet  rays,  high  temperature  or  long 
period of time.
If the saline solution remains in the tank for an extended period of time, it may cause cor-
rosion.
If you exceed the available chlorine concentration, rinse with tap water after using the 
disinfectant.

※Please  do  not  spray  on  the  materials  which  are  listed  on  the  right  table  marked  as  
‘weak’.

Cautions

An analysis table for corrosion-resistant material      

Materials

ABS resin
polyethylene
acrylic
polypropylene
teflon
silicon
epoxy resin
urea resin
Butyl-rubbe, NBR
natural, urethane rubber
titanium, glass, ceramics
stainless steel
plating, copper

phosphor bronze
brass
aluminium alloy
steel

Corrosion resistance

4. Inspection  > 

 

Cautions

 / Troubleshooting / Replacement period & Block diagram 

Summary of Contents for DES-WA50





















Reviews: