2.1.
Know your NantLife Smart Forehead Thermometer
(goes with a drawing of the device numbered- circled numbers –VJ to do)
1.
Top Cover
2.
“Start/Stop” button
3.
Bluetooth application
4.
Batteries compartment on the underside
5.
OLED Screen Display
2.2.
Unit Display
Illustration picture of the display- VJ to do
Showing:
Temperature Display
Low battery indicator
Temperature Unit
Wireless Communication signal symbol
2.3.
Display Symbols
Symbols
Operation
Measure/Solution
°F
Temperature unit
Fahrenheit
°C
Temperature unit
Celsius
Batteries indicator, empty
Replace batteries
Mobile Data transmission
Icon flash to indicate Data
transmitting.
2.4.
Battery Installation
(Drawing of the batteries compartment open with batteries insertion)
1.
Use a coin to twist the bottom following the indicating open direction, the cover will popup
once twist to the right position.
2.
Install 2 “AAA” size batteries so the + (positive) and the – (negative) match the polarities of
the battery compartment.
3.
Replace the battery cover
2.5. Battery Replacement
(image of low battery indicator)
When the low battery indicator appears on the display screen, turn off the monitor and remove all the
batteries. Replace with new “AAA” 1.5V alkaline batteries. Reattach the battery cover.
WARNING:
If battery fluid gets in your eyes, rinse with plenty of clean water and contact a physician immediately.
CAUTION:
Dispose of the device and empty batteries according to applicable local regulations.
Unlawful disposal may cause environmental pollution.